Discuss Shower temperature issue in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
1
I have a pump in the hot press which drives 2 showers in a non pressurized system. For 15 years we've used the bathroom shower without any issues and lately we've just got the ensuite up and running. Problem is the ensuite shower water starts hot and then goes Luke warm when it is running on its own. When I turn the bathroom shower on at the same time the ensuite shower then goes hot. The ensuite shower has been replaced but the same problem exists. Anybody got any ideas?
 

Reply to Shower temperature issue in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
269
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
220
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
444
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
317
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
555

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock