Search the forum,

TF1 or GOLD FILTER (same thing) ???

Post new thread

Discuss TF1 or GOLD FILTER (same thing) ??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
spanner

spanner

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,241
Is this the TF1?? Reason is that the replacement rubbers are needed and it looks the exact as all the rubber seals are well perished and Coul get the rubbers from b&q wickes, Homebase anywhere today. IMG_20151108_144732.jpg
 
Last edited:
Yes it is just rebadged tf1. On the box of the gold filter it says "fernox" on the back
 
Cheers mate. Just there wasn't any boxes or cloxes just the filter sited next to boiler with an awful puddle underneath. Thanks so I've ordered the correct kit then. Cheers kay jay..
 
Status
Not open for further replies.

Reply to TF1 or GOLD FILTER (same thing) ??? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
301
Bp89
B
D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
115
DIwhYdidIstartThis
D
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
250
exedon2
exedon2
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
207
mutley racers
M
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling News
Tiling Advice
Tiling Forum
Tiling Forum
TilersForums.co.uk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock