Search the forum,

Discuss Toilet Seat replacement in the The Welcome Wagon :) area at PlumbersForums.net

Messages
1
Hi all,

I'm looking for a replacement toilet seat as the old one has broken and I stupidly binned the old seat before checking for a makers mark on the old seat. I've checked the bowl for any makers id but can't see one. I've attached pics of the bowl and a dimensions. Sorry for the pic that looks like it was drawn by a 5 year old.

Any help with identifying either the maker of the bowl or a seat that fits would be appreciated

Thanks

Tony
 

Attachments

  • IMG_20221002_130849.jpg
    IMG_20221002_130849.jpg
    280.3 KB · Views: 7
  • IMG_20221002_124249.jpg
    IMG_20221002_124249.jpg
    145.4 KB · Views: 6

Reply to Toilet Seat replacement in the The Welcome Wagon :) area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
196
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
226
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock