Search the forum,

Token Expired

Post new thread
  • Thread starter ad832
  • Start date
  • Replies 7
  • Views 976

Discuss Token Expired in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

ad832

Hi, i tried to reply to a thread I started and I get the error message 'Token Expired' can any one explain what this is please.

AD
 
I often copy cut/paste my reply in the box , before I send and find its
" Logged Me OUT " again , ...I'm thoughtful - not quick !

( using PC ) ... have a copy to paste when logged back in ... arrgghh
 
When you sign in there is a little box "Remember me" (or something like that) underneath just click on it to stay signed in guys.
 
rpm said:
....... a little box "Remember me" (or something like that) underneath just click on it to stay signed in guys.
Click to expand...

My security measures probably broke that ....! ( Assorted of 12 scripts allowed )
.... Ahhh Probably ... a nice beer
 
Status
Not open for further replies.

Reply to Token Expired in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Lou
Lou
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
198
SimonG
SimonG
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Timmy D
T
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Stigster
Stigster
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
200
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock