- Messages
- 1
Anyone know why my diverter valve motor hardly moves have tryed a new one and still the same
(Valiant ecotecpro 24)
(Valiant ecotecpro 24)
- Thread starter Stressed and cold
- Start date
- Replies 2
- Views 1K
- ecotec pro valiant
Discuss Valiant ecotec pro 24 in the Central Heating Forum area at PlumbersForums.net
- Messages
- 4,817
My advice is to get a registered engineer to see to it for you. If the new valve motor didn't fix your issue then it most likely wasn't that and you could keep guessing and spending a fortune.
D
Deleted member 120897
Are you gas safe registered? Opening the boiler on that model forms part of the combustion circuit and requires checks afterwards. Should be an easy fix, for a competent engineer.
Reply to Valiant ecotec pro 24 in the Central Heating Forum area at PlumbersForums.net
Similar plumbing topics
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Creating content since 2001. Untold Media.