Search the forum,

Discuss Valve Manufacturer and dis-assembly in the USA area at PlumbersForums.net

Messages
2
Dear all

After moving home recentely im now in a house with a warm to say the least shower. All the hot water taps in the house give very hot water at maximum so im presuming a valve issue.

So i can research it further, i.e. removing to see if hot can be increased/ possible replacement, im struggling to identify it, see below. Any help on type or and fault diagnosis would be great. i havent yet worked out how to take the knobs off in the absence of any screws. Thanks in advance

20201014_165340 (1).jpg
 
Maybe a trevi valve

the Dome should come off / unscrew
 

Reply to Valve Manufacturer and dis-assembly in the USA area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
240
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Replies
12
Views
401
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
307
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
296
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
414
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock