Search the forum,

Vellamo Reveal Basin Mixer Tap

Post new thread

Discuss Vellamo Reveal Basin Mixer Tap in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

B

Bagshot

Messages
23
Help / advice please? I have attached pics

I want to fit a new basin tap. The new tap came with flexible hose.
Q1. Pic 1 - the fitting into the tap is recessed - how do I screw in the hose tight enough to 'fit' ?
Q2. Pic 2 - shows the current hose fitted to the copper pipe and clearly the new hose if is a different fitting - what do I need to do / buy to fit that hose to that pipe?

Thanks

Mike
 

Attachments

  • TP_1.png
    TP_1.png
    2 MB · Views: 10
  • TP_2.png
    TP_2.png
    2 MB · Views: 10
just screw the flex in to the base by hand do not twist the pipe,
buy 2 iso valves for flexi connection.
 

Reply to Vellamo Reveal Basin Mixer Tap in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
226
Dave Moore
D
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
114
Lou
Lou
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Timmy D
T
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
SimonG
SimonG
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock