Search the forum,

Warmflow B1 Thermostat Control

Post new thread

Discuss Warmflow B1 Thermostat Control in the Oil and Solid Fuel Forum area at PlumbersForums.net

R

RayPooley

Messages
102
The boiler is a Warmflow B1 Oil CH Boiler.

Does the thermostat fail in an open state or closed state with a hard failure?

Can they simply start to malfunction and not control the temperature correctly in a soft fail situation?

The boiler is working but the homeowner says it's running all the time.

Thanks.
 

Attachments

  • Untitled.jpg
    Untitled.jpg
    114.5 KB · Views: 9

Reply to Warmflow B1 Thermostat Control in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
288
oz-plumber
O
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
228
mutley racers
M
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
500
FozzieBear
F
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
214
Timmy D
T
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
287
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Tools
Tiling Advice Live
Contractor Talk
Tiling Forum UK
Tiling News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock