P
Plum Bob 66
Is that the real "isue" then Lame?
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "The clues in the title "PLUMBERS" arms" which is posted in UK Plumbers Forums on UK Plumbers Forums.
Is that the real "isue" then Lame?
So your still a trouble macker just in this class now
T
tamz
Aye but you had someone standing behind you ready to dish out a size 10 when you made a mistake
K
Kyle87
When doing gas jobs with my gas man I won't get the size 10......
I get the look if disappointment....
It's so much worse!!
I'd love a size 10 up the backside instead lol
Prime example of the right way.
R
Resolute
Personally I think this thread should've been deleted before SP was allowed in as its caused more aggro then it was worth!
Leo21 has made some good points but equally so have others (especially as most of the talk in here is banter).
As SP has been allowed in I suggest that he's allowed to remain but his posts should be monitored.
SP - my only advice is to listen to the guys on here as they'll help you loads and will probably get you out of a few sticky situations. Also, if you find yourself doing something that you've never been shown before then just ask and someone will put you straight.
Leo21 has made some good points but equally so have others (especially as most of the talk in here is banter).
As SP has been allowed in I suggest that he's allowed to remain but his posts should be monitored.
SP - my only advice is to listen to the guys on here as they'll help you loads and will probably get you out of a few sticky situations. Also, if you find yourself doing something that you've never been shown before then just ask and someone will put you straight.
D
Dotty
If the thread had been deleted it would've only been reposted. Again, and again, and again.
Sometimes it's best to let things run their course as long as there's nothing truly offensive and no matter how disappointing you find the attitudes in it.
I hope to see SP back in because he does have a good attitude. I've spoken to him a few times in PM because of my experiences with a very dyslexic friend and believe he's the real deal there.
yes, he's gone arse about face with his training but as described in the first paragraph in the 'Arms Access' post -
"The Plumbers Arms is an area that you're only allowed to view if you've been granted access (given the key to let yourself in, yes we're that friendly in this pub). To gain access you HAVE to be a professional plumber, or one going through their training process."
You will probably also note the bit about suppliers not being allowed in.
I set the ball rolling last year to admit Ray and believe now that that was the best thing for the forum. Ray only supplies trade and, understandably, is reluctant to discuss prices out in the open. Ray is a regular and some say humorous (!!!) poster. Richard from ********* is in a similar vein. I'd consider him too.
As I've said before with trainees. Cut the guy some slack. He could very well surprise us all.
And go easy with the dyslexia thing.
Sometimes it's best to let things run their course as long as there's nothing truly offensive and no matter how disappointing you find the attitudes in it.
I hope to see SP back in because he does have a good attitude. I've spoken to him a few times in PM because of my experiences with a very dyslexic friend and believe he's the real deal there.
yes, he's gone arse about face with his training but as described in the first paragraph in the 'Arms Access' post -
"The Plumbers Arms is an area that you're only allowed to view if you've been granted access (given the key to let yourself in, yes we're that friendly in this pub). To gain access you HAVE to be a professional plumber, or one going through their training process."
You will probably also note the bit about suppliers not being allowed in.
I set the ball rolling last year to admit Ray and believe now that that was the best thing for the forum. Ray only supplies trade and, understandably, is reluctant to discuss prices out in the open. Ray is a regular and some say humorous (!!!) poster. Richard from ********* is in a similar vein. I'd consider him too.
As I've said before with trainees. Cut the guy some slack. He could very well surprise us all.
And go easy with the dyslexia thing.
Last edited by a moderator:
R
Ray Stafford
It would be a funny old world if people didn't have different views.
It would be a completely sh ite world if they weren't allowed to express them.
We're all grown up here. To be honest, there is much worse dished out in any workplace.
It would be a completely sh ite world if they weren't allowed to express them.
We're all grown up here. To be honest, there is much worse dished out in any workplace.
L
lame plumber
ko roppiec
D
Dotty
odgo anm eamL!
L
lame plumber
I would have her as an apprentice 🙂
R
Resolute
I'd have her full stop!
T
tamz
No you wouldn't. Your wife would make your life a misery :lol:
L
lame plumber
amazing what turns up when you put plumbing training into youtube. Mandy and her friends will teach you to solder and even install a room stat. Savannah will even tech you to make french toast. I love the internet :8:
T
tamz
And Ashley will show you how to field strip your Glock
[video]http://www.eyehandy.com/weapons/how-to-field-strip-and-clean-a-glock-with-ashley/[/video]
[video]http://www.eyehandy.com/weapons/how-to-field-strip-and-clean-a-glock-with-ashley/[/video]
Nothing new there then.
T
tamz
Is that because she turned the valve the wrong way :lol:
P
Plum Bob 66
Really ? ;-)
P
Plum Bob 66
If Heineken made plumbers !!!
D
Dotty
Tara teaching how to solder is rivetting. I've watched it a few times to master the technique.
if only I had the balls to turn the sound up!
http://www.eyehandy.com/home-improvement/how-to-solder-copper-pipe-with-tara/
if only I had the balls to turn the sound up!
http://www.eyehandy.com/home-improvement/how-to-solder-copper-pipe-with-tara/
Last edited by a moderator:
K
Kyle87
Too bad she only soldered half a joint. She'll bugger that up when wants to solder the other side of the fitting......
Why did I spot that.......
Why wasn't I just watching boobs!!
L
lame plumber
coz yours are bigger🙂
T
tamz
No she won't because i'll keep her right if she rings me on 07802pervme :smile:
K
Kyle87
Ronald McDonald doesn't judge me........ Why should you!!
D
Dotty
Not a size 10 you'd be putting up her backside, no?
D
Dotty
We're less fattening........
T
tamz
I'd need to get Denise to answer that because you won't believe me :lol:
Official Sponsors of Plumbers Talk
Reply to the thread, titled "The clues in the title "PLUMBERS" arms" which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
