As long as the taps are switched off you won’t need to turn the hot or cold supplies off. Undo the chrome nut to release the handle. Then you will be able to remove the diverter with a spanner and grease o rings ect. Put back in reverse and you should be good to go.
I was wondering the expansion vessel but it is holding pressure. I went there to 2 weeks ago on my 1st visit and checked it then. was the same reading again today when i checked it before I lowered it.
hi G3 qualified but unsure how to join the private forum. Just didn’t want to post in the public forum.
santon 210 indirect with low pressure at the outlets and a banging noise.
Changed the combination valve which sorted the pressure drop issue but the noise persists.
Static pressure is 4.5...
Had a ronte that failed after 4 years which I replaced this week. electric panel is on the bottom of the unit which basically filled with water from the leak.Poor position for the electrics imo.
That’s the seal for the pan connector which pushes into the soil pipe. Have you had the toilet removed for any work? They tend to stay in place when you remove the pan connector If they have been in for a while or not greased.
Pushing the pan connector back into the soil pipe may have pushed the...