Search the forum,

Discuss Bored Section in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

Guest123

Following on from the request for a Electrical Section, I want a Bored Section.

Let's fill it with even more c rap than we all normally do.....just to pass the time. :tt1:
 
Following on from the request for a Electrical Section, I want a Bored Section.

Let's fill it with even more c rap than we all normally do.....just to pass the time. :tt1:

Or we could have a health and safety at work section??....
 
Or we could watch my 90 minute vid of winding ptfe tape onto those little white plastic spools.

Let's have a poll. :whatchutalkingabout

As long as it's followed by a 90 minute video of DIYers winding it round the threads of compression fittings.
 
Trust me mate, heavy drugs would make the boredom pass a hell of a lot quicker.
 
Shall we start a sweepstake on how many posts System3 gets to by the time he's recovered?
 
He'll get to 8000 before his mrs cuts his hands off! YouTube's share price has gone through the roof already!
 
If we have a boredom section it will just be filled with crappy land rover owners raving on about rust buckets "that are built to last"
 
Na did it while his fga probe was servicing the boiler.

Or watching the powerflush machine going

Nearly right!!

i was sat on my powerflush machine, with the probe hanging out the flue and fitting a carbon monoxide alarm. All this while condemning a six month old boiler :)
 
Following on from the request for a Electrical Section, I want a Bored Section.

Let's fill it with even more c rap than we all normally do.....just to pass the time. :tt1:


Sounds like the whole forum in general!

You should rename it -


ukboredplumberswithnothingpositivetodootherthanpostcrapforum.co.uk
 
Last edited:
try singalongwithlame, la la la diddly lal la :)

or if your really fed up, have a go at posting Croppie using nothing but fish names or terms, he luvs it really
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to Bored Section in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
456
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
331
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
124
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
245
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
257
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock