Search the forum,

Discuss Passed my ccn1 today! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
well done mate guess they didnt strike for another day :D
 
Thanks but it's help I got from you guys! I'll go in college and do my appliances. I might do my oil ticket ÂŁ300 half price.
 
do you get much oil work?
 
Well done mate :)
 
Oil is mostly in my area where I stay but in the town is mostly gas. I've probably done more oil than gas in my apprenticeship.
 
Oil is mostly in my area where I stay but in the town is mostly gas. I've probably done more oil than gas in my apprenticeship.

Do your oil then :)
 
Good stuff. Well done!
Do you do a lot of oil installation work or is it all service and break downs?
 
What is a good cheapest flue gas analyser to buy? Or buy 2nd on ebay? All your advice welcomed.
 
wouldn't go second hand on ebay unless you send serial number to manufacture to check its not stolen / x hire,

as most will keep them / not calibrate them

kane 455 or testo 327 good domestic cheap fga
 
327 testo I can get from city plumbing for ÂŁ380 so I'll get that. I wasn't sure about the second hand that's why I asked. Cheers.
 
No way I didn't know that. Do they come like new cars where a certain amount of mileage you do it requires a service as some engineers will use the analyser more than others and it's a shame it costs so much money.
 
No way I didn't know that. Do they come like new cars where a certain amount of mileage you do it requires a service as some engineers will use the analyser more than others and it's a shame it costs so much money.

every year else not valid

normally cells every 4-5 years
 
I have two :D

Kane 455 and a testo 330-2
 
Status
Not open for further replies.

Reply to Passed my ccn1 today! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
235
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
475
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
94
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
174
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
238
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock