Search the forum,

Gas Rate on Smart Meters keypad

Post new thread

Discuss Gas Rate on Smart Meters keypad in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

Ad_stoke

Gas Engineer
Messages
92
Hi fellow engineers.
Just a quick question. What's the quickest way to do gas rate on the new smart meters with the numbered keypads on....
I know they're a pain but anyone with info would be much appreciated..

Thanks.
 
There is a tech bulletin on gas safe. Basically when you press the button you start your timer even though there's a delay for the display to update. Press the button after 2 mins and the display will then show you the new reading. Different buttons on different meters...
 
89559e9f8261114afa4d9843de5c3d57.jpg


I could do with some info on this type it's the first one I have seen like this.
 
Keep pressing 9 I think (until gas units)
 
Just printed copy off tb 112 it has been updated I'll get rid of my old copy 2011 [emoji16]
Thank you walterwhite
 
You have to press 9 three times it's will show volume tst take the first reading then repeat the same process before two mins are up.
 
PRESS 9 and your stop watch together press 9 till the reading comes up after two mins press 9 again then again till you get second reading
 
Don't think we've any of that meters here, I'll be retired before they arrive as still waiting on 2G phone signal haha
 
Come across one a few wks ago. I would read tbs more if they made them easier to access and listed in some filing order
 
buckley plumb said:
Come across one a few wks ago. I would read tbs more if they made them easier to access and listed in some filing order
Click to expand...

Log onto engineer section on website
Click on technical information
Click on technical bulletins
Click on sort by date, either new or old on top
Or type an appropriate word or TB number if you know it in the search box

Either that or I can pop round to your house after dinner every night and load them up for you
 
Ad_stoke said:
Hi fellow engineers.
Just a quick question. What's the quickest way to do gas rate on the new smart meters with the numbered keypads on..
I know they're a pain but anyone with info would be much appreciated..

Thanks.
Click to expand...
Gas safe provide detailed instructions in a technical bulletin on how to gas rate smart-electric meteres if you're registered you should be able to access this info free.
 
There yer go. I've printed it off and got it in me analyser bag
 

Attachments

  • tb-112-obtaining-meter-index-reading-and-gas-rating-on-elecrtonic-and-smart-gas-meters.pdf
    265.8 KB · Views: 253
Status
Not open for further replies.

Reply to Gas Rate on Smart Meters keypad in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
402
FozzieBear
F
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
241
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
94
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Chuck
C
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
475
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock