Search the forum,

Angled isolating valve advice

Post new thread

Discuss Angled isolating valve advice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

Neil Aubin

Messages
2
Hi,

I have a dripping current valve.

Its after a bit of a saga with plumber. They have told me I will have to get entire new magnaclean that it is connected to. I dont think that is right and surely I can just isolate this valve from other valves in line, and then replace with another angled valve?

If so do you have any recommended suppliers. I believe it is a 22mm valve. I found one supplier here:

Universal Angled 90 Degree Isolation Valve 22mm x 3 4 For ALL Boilers 3002160280

Any advice please?
IMG_9148.JPG
 
If you phone adey up they will send you new valves let me guess they had red heads they always leak new ones are black
 
Contact adey they will provide a replacment theres a good warranty on their products. Cheers kop
 
Status
Not open for further replies.

Reply to Angled isolating valve advice in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
235
Chuck
C
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
317
Timmy D
T
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
405
FozzieBear
F
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
239
John.g
J
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock