1" GHT to 1" NPT needed. I need to find a plastic or PVC type fitting to jin together two pipes. The female is GHT, and the males side is NPT. I need to buy a bunch of them on an ongoing basis. Can anyone help me find them. No mass or metallic as they are cost prohibitive. Thanks!
Discuss 1" GHT thread (Female) to 1" NPT (Male) fittings needed Help! in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Reply to 1" GHT thread (Female) to 1" NPT (Male) fittings needed Help! in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Creating content since 2001. Untold Media.