Search the forum,

Discuss 1700 x 650 wide bath in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Alex Pelton

Plumbers Arms member
Plumber
Gas Engineer
Messages
156
does anyone know if there is a 1700 x 650 mm steel bath made?
 
Status
Not open for further replies.

Reply to 1700 x 650 wide bath in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All, I am looking to take my bath out and fit a shower. Regards to tanking. Is it ok to just seal everything with plastic rather than just paint tanking slurry? Thanks in anticipation, best regards Staggers
Replies
3
Views
246
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
163
D
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes sunk into wall behind bath. Walls have fresh tiles. Have realised as about to fit shower these pipes one is set higher than the other. If you fit a...
Replies
2
Views
201
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
308
Hi All, does anyone know why the water only fills 1/3 of the way please?
Replies
4
Views
196
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock