Search the forum,

Discuss 22mm Exposed Thermostatic Mixer shower in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

James McC

Hello,

I really hope somebody can help me with this problem.

We have an Exposed Thermostatic Mixer shower, with 22mm inlet/outlet pipes, that needs replacing.

We can only find similar mixer showers made for 15mm pipes, and have been told that this is now the standard fitting. This is a real problem for us as we really don't have enough of a budget to pull out the wall and replace the piping. Ideally, we'd like to get an identical shower, and just swap it out, but this doesn't seem to be possible.

Can somebody advise please? Where can I get an exposed thermostatic mixer shower suitable for 22mm pipes?

Many thanks in advance.

James.
 
Thanks, I will look into those suggestions todays.

Cheers,

James.
 
Status
Not open for further replies.

Reply to 22mm Exposed Thermostatic Mixer shower in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
151
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
205
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock