Discuss 3 tap hole basins in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

AWheating

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
9,875
hi, have not seen on in years but i have been asked to try and source a tap for a 3 tap hole basin. Anybody know of a good place to start looking?
 
I always start with google, sorry if this is not what you wanted to hear
 
Fitted a few from Bristan in the past maybe check their website regards turnpin
icon7.png
 
Depends what budget you have fitted a few lefroy brooks ones of late but pricey
 
Hansgrohe
Lefroy brooks are good but very old fashioned looking
 
Last edited by a moderator:
ive got to try and match them to the bath taps hence was looking for idea's where to look. there are plenty of modern looking ones out there, ill check out the manufactures web sites.
 
I always start with google, sorry if this is not what you wanted to hear

oh google is the first place i went, i always struggle tho cus after about 10 mins of looking i tend to wonder off into a website and looking at other things that catch my eye. its like window shopping but you can do it in your underpants :)
 
Status
Not open for further replies.

Reply to 3 tap hole basins in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top