Search the forum,

Discuss 3rd ATAG fitted........ in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Scott_D

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,131
IMG_2333.JPG
Fitted my 3rd ATAG combi
I'm impressed with the quality and the back up seems good.
The only think I don't like is the expansion vessel behind the boiler (that's why I used an extra flue elbow to allow future access)
 
I have fitted a couple but people hear think the boiler world revolves around worcester.
 
It’s definitely a mixed bag on here. I like the ATAGs would like them more if I could get the blooming timer to work properly.
 
What's up with it?
Are you on the ATAG Facebook group?
 
I am Not on Facebook mate. Doesn’t come on at the correct times and comes on by itself during the night. Customer has it set to come on at 0630 and it comes on at 0500 and has t to come on at 1700 and it comes on at 1600?? I am waiting for the rep to get back to me. He is either avoiding me or on holiday?:p:p:cool:
 
You need to turn the pre heat off I believe. It's trying to get the house to the set temp for the 'on' time instead of turning the heating on
 
Had a look at them myself , but even the guy for atag told me to avoid their controls particularly the wireless ones. Problem I had was selling a boiler most people have never heard of and for Worcester / Vaillant money. Liked the look of the boiler to be fair.
 
Got one fitted in my house good but expensive for what they are i have the one controller fitted which i like no issues with connection controls well , weather comp is a waste of time not warm enough for my missus hotwater is not that good on a 27 kw , as above hard to sell i prefer Intergas seem to be fitting these more and more now . kop
 
Last edited:
Status
Not open for further replies.

Reply to 3rd ATAG fitted........ in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello everyone, I am new to the forum, thanks for having me. Tomorrow I am getting an ATAG i28C installed but, unfortunately, the gas engineer that will fit it is not an ATAG partner. Therefore, I spent the weekend trying to understand a bit more about what options I would have to control the...
Replies
6
Views
2K
Good afternoon, I am experiencing a pressure issue with my heating system and was hoping to receive additional insight as to what the problem could be. We have a biomass boiler and stratification tank set up and recently had an issue with boiler pressure dropping off when the system was cold...
Replies
9
Views
359
M
Hi, we have a back combi heater. Whenever the heating comes on it seems to lose pressure within a few hours and I have to refill each morning. The boiler seems to function well, and the pressure only drops with the heating and not the water being on. Ie it started last winter and was then...
Replies
1
Views
379
Hi all I'm considering getting an ATAG IC Economiser (combi), and to take advantage of the 14 year warranty I need to get one of 2 smart controllers: ATAG One Zone Tado v3+ An annoyance about the Tado is that the UK version doesn't support OpenTherm (unlike the EU model), but this is...
Replies
6
Views
3K
Size of bathroom 230cm x 210cm Height 230cm Birmingham Area Initial problem Burst pipe underground in bathroom, concrete. Have had this dug up & made safe for now, have had affected pipe cut & put end caps on. Work required Full bathroom remove old tiles walls and floor. Renew tiling. New...
Replies
0
Views
316
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock