Search the forum,

Discuss 500mm flexible hose 15mm compression to M10 monobloc in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
G

gyblue

Hello all, I am trying to find a longer flexi hose and have tried all of the usual suspects including the internet but can only find 300mm long.

Does anyone know if these are are available and if so where I can get them please?

Thanks

Andrew
 
Loads of places do them up to a meter some of them. (Shudder)
 
Most plumbers merchants up here have em

Make sure you get the correct bore for your installation!

( pressure and flow ).
 
Most plumbers merchants up here have em

Make sure you get the correct bore for your installation!

( pressure and flow ).
 
Loads of places do them up to a meter some of them. (Shudder)

i will ask one of my customers who seems to know where to get them ;)

IMG_0195.jpg
 
i have another pic of one trying to walk out the door, if i can find it.....
 
Looks a bit like one of the robots out of War of the Worlds with Tom C.
 
Status
Not open for further replies.

Reply to 500mm flexible hose 15mm compression to M10 monobloc in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
94
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
191
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
405
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
241
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock