- Messages
- 34,379
- Solutions
- 2
???? where is it then
Discuss My names Andy and i am new here. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
In his van ...he just dropped the manifold.???? where is it then
In his van ...he just dropped the manifold.
What are you looking for i know what it looks like.
All sounds a bit suspect to me. So on that note. I am out.
All sounds a bit suspect to me. So on that note. I am out.
sorry to say its alot older than 2 years
your looking 5-7 years old (they only last approx 9-12 years)
22mm and 15mm stnd compression nuts are what your looking for
and a new set of fibre connecting washers
might be best phoning worcester up and asking for the nut kit that come with a new boiler
fyi you have an open end gas pipe and no self respecting gas safe engy would leave that open
Fat chance that’s going to happen by the sound of it. Anyway that’s the last from me on this one.dont forget any new / install of a boiler needs to be notified to building control
Thanks shaun.dont forget any new / install of a boiler needs to be notified to building control
Thanks shaun.
That gas connector has been disconnected by the meter as this boiler needs 22mm not 15mm apparently.
I am taking out all un usedpipework.
But all legal stuff is being dealt with. I was not aware building control needed to be informed but thats why i have to pay some one lots of money to fill in forms.
That said i respect you for your replies but i can do without punch and judy antagonising.
So if its ok with you.
I will let them have their toys back. I will close the door on the way out. Shame because i could have learnt a lot i guess.
Reply to My names Andy and i am new here. in the Plumbing Jobs | The Job-board area at PlumbersForums.net