Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss AGA Going out after 12 to 36 hours in the Oil and Solid Fuel Forum area at PlumbersForums.net

Messages
1
Have a problem with an oil fired AGA conversion
Has been no problem for 5 years, now goes out 12 to 36 hours after lighting, have checked fire valve, and have installed seperate line from tank to feed AGA
went for 3 weeks one time, then went out due high winds. Has now started same pattern
Help, losing what liteel hair I have left
 
Do you have the Aga properly serviced? Maybe stating the obvious points but my first thought would be the steel pipe feeding the Aga burner gradually narrows with carbon & has to be carefully cleaned, literally drilled out each yearly service. The wicks not as important, but need to be replaced on servicing.
If it ain’t burning properly, perhaps weakly, due to partially blocked flow rate, then windy weather could put the flame out.
 

Reply to AGA Going out after 12 to 36 hours in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
440
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
313
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock