Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Any suggestions as to why my sink is filling up quickly? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

T

Thomasxox

I’ve recently fitted a new toilet/basin unit which seems to not allow the water from the basin to drain quick enough without it filling up even with no plug in. I have checked the waste pipe work which is clear of blockages, I’ve changed the trap in case the flow rate wasn’t enough but it still fills quicker than it can shift. Any advice would be appreciated

Thomas
 

Reply to Any suggestions as to why my sink is filling up quickly? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
428
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
206
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
306
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
542
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock