Search the forum,

Discuss Apprentice Water Regulations Officer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Ric2013

Plumbers Arms member
Plumber
Messages
3,909
Hi.

I am currently in the process of being interviewed for the above position with the local water board. It sounds like a well-paid, secure, job, but I am aware that you really have to like the job you do otherwise you end up leaving and are neither well-paid nor secure :) so I don't want to make a bad decision.

I wonder if anyone here has any experience of working for a water undertaker, or has had much experience with Water Regulations Officers? Just after as much information, personal or anecdotal, that will help me see if I am the kind of person that will do this job happily.

Happy to hear ANY thoughts you might have.
 
well you go round commercial buildings inspecting, if there safe and comply with regulations eg no hoses left on and coiled in skins etc
 
I'm sure there's more too it but down here I work for the local council and that's all the waterboard seem to be doing recently. Ballache when the schools are over 100 years old and there is pipework everywhere. Oh and trying to find a byelaw 30 kit for a tank over 1000 litres. If that's what the kits called. Secure job for you tho
 
Well, I didn't get it.

But all I can say, is that the recruitment process works well because I noticed the people from the water board were not like me at all. I would never have fitted in.
 
Well, I had 5 days' notice of the second interview, and fortunately I was free that day, because there was no option of any other date in their minds! This was after application online, online exams, and traditional sit-down interview...

The second interview (75 miles away at my expense: ouch!) consisted of lots of team exercises: making a rollercoaster for a golf ball from guttering, deciding how to allocate people on 4 lifeboats based on their survival skills, vulnerability, and the useful (but not transferable) objects they carried, and doing a jigsaw puzzle as a team largely without verbal communication.

Finally, assembling a model made from 4 sheets of Perspex with studs, nuts, and spacers by yourself while an examiner watches you and doesn't even smile when, having finished the model perfectly, you notice you missed out 1 washer, establish eye contact with the examiner, flash a huge grin, and proceed to find where the washer was supposed to be so you can fit it. Apparently a sense of humour is not allowed at the water board. Their loss.

Very weird, stilted conversation with the examiners during tea breaks. They would chat, but it felt very artificial indeed. I don't know if they were single, married, gay, or what, as they would literally answer questions without volunteering much information at all, so it never really felt like I knew them as people in any small way.

I think what they want is someone who will do what they are told without asking too many questions and wants a secure, public sector role (while promoting the branding of the privatised water board) without much hope of career progression, and who will never get bored. Quite frankly, 5 hours in that hotel was enough for me!

In any case, a firm that takes 5 days to reply to an email requesting an interview location for the first interview and then tries to cancel the interview on the grounds that I had not replied to the email within 10 hours (my apologies for having a job!) is probably not a very good firm to work for if you are of independent mind.

My mother's comment was 'I'm glad you didn't get that job: I thought you'd be bored' :p
 
Lol
 

Reply to Apprentice Water Regulations Officer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
250
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
207
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
495
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
362
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
260
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock