Currently reading:
Aqualisa processor problem

Discuss Aqualisa processor problem in the USA Plumbers Advice area at PlumbersForums.net

Messages
6
Electrician has stood on my aqualisa shower processor box/pump unit and now the water does not get hot enough for a shower even though the indicator light stays on to say it has reached temp....any ideas ?
 
I think it would be difficult to prove ....he hasn't admitted he done the dastardly deed

OK - I assumed you had seen this happen .......... given the way your OP is worded.

The failure could be a complete coincidence:)

PS : Have you tried switching it off at the isolator for a few minutes?
 
OK - I assumed you had seen this happen . given the way your OP is worded.

The failure could be a complete coincidence:)

PS : Have you tried switching it off at the isolator for a few minutes?
I have read that the unit should be isolated for two to three hours to reset it but that was after a power failure....but I will give it a go
 

Reply to Aqualisa processor problem in the USA Plumbers Advice area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock