Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Aquavalve 600 Thermostatic - On/Off Control centre screw in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
16
Hi

This is pribably a stupid question but I have an Aquavalve 600 Thermostatic shower and I have lost the centre screw from the control know - where can I get one or what do I look for?

Thanks
 
Well it is made by aqualisa I believe,so would say ring them,but can not think of screw you mean
 
ring aqualisa tell them what you want they normaly send small items like that for free if you are a plumber
 
Status
Not open for further replies.

Reply to Aquavalve 600 Thermostatic - On/Off Control centre screw in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
263
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
265
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
139
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
483
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock