- Messages
- 320
If anyone can give me pointers I'd be most grateful. I have flow and return coming in at the floor level in one corner of a room that rises to ceiling level runs around three walls and drops to the ufh manifold.
It is drained at the moment but when I refill Id like to have done the most I can to remove air problems.
I was planning on putting aavs on the flow and return at the top of the run up the wall.
Will it be necessary to put them at the top of the run down the wall to prevent air getting pushed into the ufh?
Also the ufh just has a pump on it without a zone valve. Does it need a zone valve or can it be left as it is. Either was going to interlock it with the boiler pump or it is run of its own stat at the moment so could be left that way.
Thanks Jon
It is drained at the moment but when I refill Id like to have done the most I can to remove air problems.
I was planning on putting aavs on the flow and return at the top of the run up the wall.
Will it be necessary to put them at the top of the run down the wall to prevent air getting pushed into the ufh?
Also the ufh just has a pump on it without a zone valve. Does it need a zone valve or can it be left as it is. Either was going to interlock it with the boiler pump or it is run of its own stat at the moment so could be left that way.
Thanks Jon