Ball park figure for a flush

[Bogart]

What would anybody care to hazard as a fair price for a, pre oil boiler install, flush.
There are 20 radiators in total. Am awaiting a figure from a heating firm and
am not very expectant on a good price as they seem to come up with random figures.
They gave me a figure 2 years ago for a Kamco flush which was £550 then so god knows what it will be now. I have seen you can hire a machine for £150 a week maybe the DIY route is the way to go.

 

[Deleted member 32524]

If done properly that will be a long day. 550 for 20 rads seems ok to me.

 

[Riley]

Depending on the state of the system that could easily be a day and a half to 2 days work. We don’t discuss prices on the forum as there is so much geographical fluctuation

 

[Bogart]

Fully understand but the £550 was 2 years ago!

 

[Sharp Point]

And?

 

[JKG]

Price seems ok to me

 

[Scott_D]

Why not get the boiler installer to do it as part of the job

 

[Harvest Fields]

What would anybody care to hazard as a fair price for a, pre oil boiler install, flush.
There are 20 radiators in total. Am awaiting a figure from a heating firm and
am not very expectant on a good price as they seem to come up with random figures.
They gave me a figure 2 years ago for a Kamco flush which was £550 then so god knows what it will be now. I have seen you can hire a machine for £150 a week maybe the DIY route is the way to go.

Experience is key with a flush. Could take 2 days. Sounds cheap to me.

 

[Riley]

I concur I’d be doing only 10-12 rads for that

 

[Harvest Fields]

I concur I’d be doing only 10-12 rads for that

Stop using my words!