Hi, my Betacom boiler stopped working a few days ago and showed the error message F.28, I tried defrosting the condensate pipe then resetting the boiler and got the same error after about two hours. Then I took the condensate pipe out and let the boiler drip into a bucket, then reset the boiler again and got the same error. I reset it again last night and woke up this morning to a different message flashing on the display (it's the cross symbol that you get when you restart the boiler). Any ideas would be a great help.
Discuss betacom 4 24c problem in the Central Heating Forum area at PlumbersForums.net
Reply to betacom 4 24c problem in the Central Heating Forum area at PlumbersForums.net
Similar plumbing topics
Hi
I have a Vokera 15 vhe boiler and all has been running well for the last 6 months since moving in up until a few weeks a go.
Boiler throws up...
- Question
My Worcester Combi Boiler is not working, instead the display flashes on and off repeatedly, as shown in <a href="
View...
- Worcester Boiler broken
- Central Heating Forum
Condensing boiler installed by local Gas Safe plumber in 2014, not combi. Failed a couple of weeks ago with flashing blue light which googling...
Apologies if this has been answered elsewhere, but my family and I are starting to crack. I'll start at the beginning, and maybe someone will see...
Woke this morning to no hot water but heating was working fine. Checked the forums and checked all the common problems:
Water and boiler pressure...