black pipe gas elbow or 45

[ted]

don’t work. i need something in between to follow outside deck. any suggestions??

 

[ShaunCorbs]

Don’t think they make anything in between could you have the gas pipe bent to match the angle?

 

[oz-plumber]

Use 2 x 90 bends.
1 facing down or up, the other any direction you like.

 

[ted]

Use 2 x 90 bends.
1 facing down or up, the other any direction you like.

Thanks I’ll try that or a 90 and 45 Till I get the right angle. Thanks again

 

[Gasmk1]

what size pipe,you can get 45degree fittings
[automerge]1594217184[/automerge]
if you can't get right angle bend the pipe

 

[ted]

what size pipe,you can get 45degree fittings
[automerge]1594217184[/automerge]
if you can't get right angle bend the pipe

it’s 1/2 inch pipe Maybe with a 45 and a 90 and a little bending I can come close? It seems to me I would need a long lengthto bend it? Yes I have 45s and 90s I can’t get the right angle.

 

[oz-plumber]

If you use 2 x 90 bends, you can get any angle you want.
Don't try and mess around with 45 bends - too hard to line up and get right

 

[ted]

If you use 2 x 90 bends, you can get any angle you want.
Don't try and mess around with 45 bends - too hard to line up and get right

Oh man now that you make me think about it you are absolutely right about the 90s. I made it work with 45s with struggle before I read your message. Anyway thanks so much for helping me.