Search the forum,

Boiler condensate hose to pipe connector has snapped. What's the best replacement?

Post new thread

Discuss Boiler condensate hose to pipe connector has snapped. What's the best replacement? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

Chris Ball

Messages
2
Hi all,

The connector between the 15mm flexible condensate hose and pipe from my boiler has snapped. I'm struggling to find a replacement connector. I'd appreciate it if someone could point me in the right direction please. Also, what's the best way of removing the old connector?

Thanks in advance.

rkKxHja1T4+0YNyI+9i1vA.jpg
 
Pump House Drain Adaptor 3/8" - 22mm

And you will need an overflow coupling and some overflow/ waste glue

You can put it into a bucket for now (don't forget to empty the bucket tho)
 
Ta for updating us
 
Status
Not open for further replies.

Reply to Boiler condensate hose to pipe connector has snapped. What's the best replacement? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
186
dreikher
dreikher
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
231
DIwhYdidIstartThis
D
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
186
mutley racers
M
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
39
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock