Search the forum,

Boiler magnetic filter replacement

Post new thread

Discuss Boiler magnetic filter replacement in the USA area at PlumbersForums.net

P

paxton47

Messages
1
Our filter is leaking and causing water pressure to drop. I think it is a Zeetec M1 or M2 (two valves) but have been unable to contact Zeetec and their online store is not currently operational (ZEETEC LIMITED :: Boiler Filter M1 - https://www.zeetec.uk/zeetec/product/details?pid=B01000019-1P)


Can I get a different brand and if so are there any specs that I should be aware of with the one I am replacing? Thanks!
68BD6532-7D70-4325-B524-B7C1DC2B10A4.jpeg
BBC4C1B6-B42C-4722-8205-F17A2E6B6ECC.jpeg
 
ADEY pro 2 or fernox omega
 

Reply to Boiler magnetic filter replacement in the USA area at PlumbersForums.net

Similar plumbing topics

A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
306
oz-plumber
O
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
248
PSxxxxxx
P
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
261
mutley racers
M
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
180
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbing Advice
UK Tiling News
Tilers Forum
UK Tiling Forum
Electrician Talk Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock