Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Boulter Boiler Camray 5 Combi. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jackplumb

From what I've been told Boulter Boilers have been taken over by Worcester Bosch, what would the Camray 5 come under on the Worcester web site?
 
Mmmmmm. Seems very strange. They appear to come by the name of Camray 5.

Go to oil boilers on the web site and go to discontinued oil boilers.
 
Camray taken over by Boulter, taken over by Worcester, taken over by Bosch. Camray 5 discontinued and not made for some time now. Good boiler in its day.

Forget asking WB for tech support as nobody there seems to know anything much about them and don't appear to want to know. - ask on these forums. Baffles available but expensive - I find it's cheaper asking my engineers workshop to make replacements.

Usual faults
1) rubber "o" ring on the flow switch needs replacing every few years (13mm x 4mm ring)
2) expansion vessel hose prone to blockage, vessel membrane fails after time
3) Danfoss diverter valve requries servicing and "o" rings replacing every few years ("o" rings are in one of the Holdtite kits and use hard silicone grease)
4) bottom baffle deteriorates if burner running too hot or not regularly serviced
 
Status
Not open for further replies.

Reply to Boulter Boiler Camray 5 Combi. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
281
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
229
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath...
Replies
2
Views
210
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
268
PSxxxxxx
P
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
291
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock