Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss boulter bunderus in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stevetheplumber

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,619
as above with 24vs permenantly on trhe divertor motor first thought was the flowswitch for domestic but boiler ramps up to full chat when the tap is opened so would assume its working unusually this boiler is in heating when at rest
 
Status
Not open for further replies.

Reply to boulter bunderus in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
231
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
205
Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably...
Replies
1
Views
161
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was...
Replies
0
Views
235
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
294
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock