abc_plumb
Gas Engineer
- Messages
- 106
Forgot to update this, so here I am.
Hopefuly it helps someone out there.
The main pcb was not the issue
It was the smaller display board which deals with the software side of things.
Also very important to set the correct code of the boiler to the board.
Or better stay way from this pile of
Hopefuly it helps someone out there.
The main pcb was not the issue
It was the smaller display board which deals with the software side of things.
Also very important to set the correct code of the boiler to the board.
Or better stay way from this pile of
