Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Can anyone identify this shower waste in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
59
Hi
I've managed to undo my shower waste replace the top cover where the silver cap clips onto as one of the tabs is broken. (I cannot get access to anything under the shower tray) I have had to put it back together
still with a broken tab.

I've been to 3 plumbers merchants but no one can identify it or anything like it.

Can anyone help to identify the make. The silver cover keeps coming off due to one of the tabs bring broken. The middle pulls out revealing the inner ring which is screwed in. I really just need to replace the outer ring which the silver cover clips onto.

Any help much appreciated.
Mike
 

Attachments

  • showerwaste.jpg
    showerwaste.jpg
    90.4 KB · Views: 39
Status
Not open for further replies.

Reply to Can anyone identify this shower waste in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
263
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
314
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
441
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock