Discuss Can these pushfittings be removed? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
- Messages
- 34,371
- Solutions
- 2
Need to push the black release ring eg towards the chrome body and then twist and pull the whole thing off
Reply to Can these pushfittings be removed? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Hi
Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Newest Plumbing Threads
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 2
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 2
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-