Search the forum,

Discuss Certificate software in the Plumbing Jobs | The Job-board area at PlumbersForums.net

SWG Solutions

Gas Engineer
Messages
25
Hi there, just would like some help on which software people prefer to use to create their gas certificates if they do it through their phone or tablet. I have been trying ‘Gas checker’ but I’m not overly keen on it. I feel the software is a bit poor.
Thanks
 
I used to use Easy Cert but not had the best experience with them.

A friend uses commusoft he says it’s brilliant (it send customer text messages, engineer tracking, customer tracking, accounts etc....) apparently it’s all singing and dancing.
 
I used to use Easy Cert but not had the best experience with them.

A friend uses commusoft he says it’s brilliant (it send customer text messages, engineer tracking, customer tracking, accounts etc..) apparently it’s all singing and dancing.

I don’t know whether it’s the software or if it’s me! I can’t get used to them at the moment but a lot of clients prefer everything via email which is frustrating!
 

Reply to Certificate software in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
518
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
282
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
350
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
175
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
262
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock