Discuss CH pipes creaking for hours after heating turned off. Any ideas? in the USA area at PlumbersForums.net

Messages
2
Hi, recently moved into my first house and am fairly new to DIY.

I've been experiencing issues with banging and creaking central heating pipes since I moved in. I've now lagged and secured piping wherever I can access it which has fixed the issue to some degree however fitted wardrobes are causing complications with access in certain areas.

Now I understand that it's normal for pipes to expand and contract when heating and cooling however my pipes seem to creak even hours after the heating has been turned off. I've bled the radiators and can't seem to get any air out of them. Any ideas what could cause this at a point where the pipes should effectively be cool?

Thanks

Josh
 
Any ideas what could cause this at a point where the pipes should effectively be cool?
The cool pipes will be left in tension. The stick-slip release of this tension can take hours before everything stabilises.

The ideal solution is to design pipework that accommodates the expansion and contraction, e.g. dog-legs or corners, and mount pipes so that they don't rest directly on woodwork but have a pad, traditionally hemp lagging, that allows them to slide without sticking.

If you secured pipework without allowing for some sliding you may make matters worse, or you may get lucky.
 
Thanks for your response. It does see like I've traded the banging/clicking noises for this long running creaking! 🙄 Heatings been off about 8 hours and I'm still hearing it intermittently.

I did secure a long straight run of 3 22mm copper pipe using felt lagging on the notches on the joists along with some styrofoam tubing on the middle pipe to stop them from touching eachother and the floorboards above. I did have to stand on the floorboards to compress the foam down enough to screw the boards in so the pipes are effectively wedged between felt and foam (no clips used). I guess maybe the foam has put downwards tension on the pipes?
 
I would remove the foam and just just felt lagging
 

Reply to CH pipes creaking for hours after heating turned off. Any ideas? in the USA area at PlumbersForums.net

Similar plumbing topics

Good afternoon, I am experiencing a pressure issue with my heating system and was hoping to receive additional insight as to what the problem...
Replies
9
Views
401
hello experts, I am not a DIY plumber, just a home owner who had a plumber come in to fix a couple of things at home. But doing all of this...
Replies
7
Views
727
I have a growing damp patch on my ceiling, I initially assumed it must be from the empty flat above (and therefore cannot gain access), and have...
Replies
1
Views
578
I have just moved into a late 1990s new-build house with a small bore (about 1/2" OD pipes) gas fired boiler central heating system. All the...
Replies
4
Views
513
Our house was built in 2007 and we are the second family to live here - moving in in 2017. The central heating has been working fine - although...
Replies
6
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock