Search the forum,

Discuss Combi boiler noise from hot water system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

jtrssn

Our Ferroli Optimax 25 C combi boiler has recently started making a loud noise (a sort of low pitched whine/rumble) whenever there is a demand for hot water. The noise starts about 15sec after any hot water tap in the house (including the shower) is opened and lasts for about 30 sec if the tap is left running. After that the noise gradually subsides and is silent while the tap runs. If the tap is closed before the noise stops the noise continues for 5-10 secs. The noise can be heard throughout the house and even outside but is loudest on the landing next to the boiler. There is no noise when the central heating comes on.
The engineer who installed the system and services it annually is mystified and has nothing to suggest.
Can anyone help please? We are getting quite anxious about it.
 
try cleaning the plate heat exchanger if its blocked it may be causing the main heat exchanger to boil/kettle as not enough water is circulating thro it when heating the hot water circuit, only a thought cannt be sure as havent suffered this fault on hw system to be able to quote positively if im right.
 
Thanks for the suggestion oldplumber.

The boiler has just been serviced so I am assuming the heat exchanger was cleaned. Maybe wrongly?
 
heat exchangers arent flushed thro on a service, have a look at your boiler manual to see what happens in a service. is there any inhibitor in your heating system, if not pop some cleanser in for 2-3 weeks, flush the system then add inhibitor, this should have been done and may clear up the problem without whipping out the heat exchanger first.
 
Status
Not open for further replies.

Reply to Combi boiler noise from hot water system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
261
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
205
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
150
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
311
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
231
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock