Search the forum,

Discuss Combi losing pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
9
Hi
I have a Combi boiler that keeps losing pressure. I top up, up to 1.5, but this drops within 6 hours and the system switches off.
We have looked everywhere and cannot see a leak. I have used the Fernox F4 leak sealer, but this hasn't helped.
Any ideas?
(Yes I have had a Gas Safe Engineer out before you post that)
 
Hi
I have a Combi boiler that keeps losing pressure. I top up, up to 1.5, but this drops within 6 hours and the system switches off.
We have looked everywhere and cannot see a leak. I have used the Fernox F4 leak sealer, but this hasn't helped.
Any ideas?
(Yes I have had a Gas Safe Engineer out before you post that)
Then I would get him back out. As it is clearly not fixed and you have looked at the external parts of the system. It maybe within the boiler? Is the copper pipe outside dripping?
 
No, no problems with the pressure release
He suggested the leak seal, so I've tried that. Was just looking for advise before getting him back out.
 
What boiler?
Top up the pressure
Turn off the power to the boiler
Shut the flow and return valves
If the boiler looses pressure it's the boiler
If the system looses pressure it's the system.
 
Hi,
please can you offer me some advice. I have a greenstar 37CDi boiler losing pressure. I charged to 1.5 barg and closed flow and return 90 degree boiler valves to shut position. Overnight the pressure had dropped to zero by the morning. I have already fitted a new expansion vessel and checked bladder pressure is still OK with no water on bladder side. I have left a container under the pressure relief valve and observed no water over 24 hrs leaking from it. Any other ideas for me to check?
 
Hi,
im not gas registered, this id my own boiler. I thought i had a leaking pipes but not sure now after checking the boiler last night.
 
Hi,
im not gas registered, this id my own boiler. I thought i had a leaking pipes but not sure now after checking the boiler last night.
I would get a Gas Safe in mate. You shouldn’t be taking the case off your boiler.
 
Yes - no playing with the boiler or its controls please. I had a couple of slow leaks that were in the CH plastic distribution pipes to ground floor rads at home. The rising connection to the rad was copper but there was a transition to plastic (90 deg elbow) in the concrete. Weep weep, ho hum. My first step was to put in valves to isolate the rads one at a time and locate the leak.
 
hi,
Greenstar 37CDi boiler.
Pressure relief valve is dry but i have noticed a constant steam of water from the condensate pipe. Any ideas what has failed in the boiler?
 
hi,
Greenstar 37CDi boiler.
Pressure relief valve is dry but i have noticed a constant steam of water from the condensate pipe. Any ideas what has failed in the boiler?

Even when the boilers off ?
 
Well the Electrician thinks the heat exchanger may have a pin hole :)

IMG_1027.JPG
 
Hi Shaun,
Yes even with CH not running. If I top up pressure to 1 bar then water starts to flow out of condensate pipe.

If you tell him that he should sort it / give you advice on your options
 
Status
Not open for further replies.

Reply to Combi losing pressure in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
250
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
226
P
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
195
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
244
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
362
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock