Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss confused with worcester in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stokecity

Gas Engineer
Messages
137
hey guys,

WGS28iJ - flow rate 11.4
WGS25Si - flow rate 10.2
WGS30Si - flow rate 12.3

im abit confused with these 3 boilers as everywhere i look they are listed as 24kw boilers??? is this right??

thanks
 
24 kw is the heating output, as I believe the Junior range of combis are all 24 kw ch output.
 
i think they all do 24kw on the heating side if thats what you mean. ^^^^^ beat me to it
 
they suggest they are a 28kw, 25kw and a 30kw from the model number and the flow rate, but are listed as 24kw output?
 
cheers guys, all other boilers ive looked at have listed dhw output, then listed the ch modulating output e.g. 28kw boiler CH output 6.7 - 19 kw

thanks for clearing that up
 
Status
Not open for further replies.

Reply to confused with worcester in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
300
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON...
Replies
6
Views
280
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from...
Replies
0
Views
104
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock