Discuss ContractorForum: 6mm Hardibacker: Good morning all. Hope you all had a very merry xma in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
-
Not open for further replies.
Administrator
Staff member
Admin
- Status
-
Not open for further replies.
Reply to ContractorForum: 6mm Hardibacker: Good morning all. Hope you all had a very merry xma in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered.
A Plumber in Herefordshire was...
