Discuss CP12 on a gas hob in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

desijas

Hello,

I’m just about to carry out CP12 on a gas hob which has no brand marking and is tiled in.

I’m happy to check the gas taps check and see if it has a AECV and a gas rate but without a manual for the hob do I need to remove it to find the badge details or do I use my findings from the gas rate itself?

 
Why can't you see underneath?
Need to rate it anyway too.
 
yes you need to read the data badge.

AECV = ? it should have a means of isolation, an Aditional emergency control valve is not for appliance isolation.
 
Last edited:
Never taken an oven out yet to check for an isolation valve. Gas rate, tightness test, flame picture and safety devices is what I do.
 
I take out every oven for a hob inspection, 2 mins work!
 
Gas rate a hob on a CP12, that's news to me! Each individual burner or all on at once? What's it gonna tell you if you haven't got the mi's?

Ventilation, flame picture, operating pressure are the essentials for safety. Then you do a visual on proximity to combustibles etc. There's a list of the 'have to do's' on the back of the safety certificate... As long as you know it's got adequate gas and the burner ain't dancing like a snake charmer, you're not gonna kill the custard ... Main issue I've ever come across with Hob's is reduced BP when the boiler comes on and no FSD! OH, and swimming with grease!!!! lol
 
I particularly dislike the ones which are shrouded in tin foil...
 
I particularly dislike the ones which are shrouded in tin foil...

This is against regs and classed as at risk as gas can build up under the foil,get loads of far eastern tenants do it,unhappy when I take it off

imho
 
I particularly dislike the ones which are shrouded in tin foil...

Why do people do that??? Any one know?

Get quite a lot of hobs with only one or two burners working. Grease got so thick it's spilt into the pre aeration chamber and blocked the injectors!! Dirty begga's :puke:
 
Status
Not open for further replies.

Reply to CP12 on a gas hob in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all gas engineers. While doing landlord’s gas safety , if gas hob do not have data badge or manual . How can we test it for safe to use ??
Replies
3
Views
975
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
556
Dear All New member here, coming looking for help. A few weeks ago I had work carried out by a British Gas Homecare service technician. It...
Replies
14
Views
988
Hello, Can anybody tell me what the engineer is required to check in the process of doing an annual gas/boiler safety check? Is there a specific...
Replies
18
Views
3K
Aquarius
A
In our Village Hall we have a Ideal Concord CXS/SD40/H central heating boiler. This was installed new when we had an extension built and the...
Replies
10
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock