Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Diverter valve installation in the USA area at PlumbersForums.net

C

Clivev73

Worcestershire heatslave 15/19 oil boiler, Diverter valve body and motor replaced, now having issues with water pressure I'm suspicious the brass body with A And B ports have been installed backwards. Can anyone tell me which way it’s supposed to be?? Ie A to hot water and B to Central heating? Or vice versa???
 

Reply to Diverter valve installation in the USA area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
231
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
344
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
207
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
542
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
328
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock