Discuss Draining a megaflow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

RustyH

Hi

I need to replace my kitchen taps. Ordinarily I would turn of the main house stopcock and drain the system - then fit the new taps

However we have just had a "mega-flow" installed. If I do as described above will there be any issues when refilling the system ? i.e.airlocks etc ?

Thank you
 
it's mains pressure so as Tamz said, you'll be fine. You only get air locks on gravity systems
 
Status
Not open for further replies.

Reply to Draining a megaflow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi Everyone, I'm moving to a megaflow from a regular immersion heater set up. The house has several showers and at the moment they are fed by...
Replies
5
Views
571
  • Question
My daughter's place has a small water leak on a ground floor radiator valve. The radiator pipework is small diameter.i.e 8 or 10 mm. A plumber...
Replies
3
Views
415
    • Like
Hi, I need some help on this shower drain installation. I’m about to install a corner shower kit in my basement bathroom. But I just found out the...
Replies
9
Views
808
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
261
Hey, forum friends! đź‘‹ Excited to introduce Master Drain Ltd, your go-to expert for top-notch drain installation and repair services. Here's what...
Replies
0
Views
429
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock