D
Deleted member 123904
what is the size of the allen key used to fit a duravit wall hung bidet on a geberit frame
Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss duravit wall hung bidet in the USA area at PlumbersForums.net
- Messages
- 34,367
- Solutions
- 2
6 or 8mm I think
Reply to duravit wall hung bidet in the USA area at PlumbersForums.net
Similar plumbing topics
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi, basic question, any insight much appreciated.
Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Newest Plumbing Threads
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 0
-
Need a reliable emergency plumbing or emergency electrician services
- Started by levi_shah
- Replies: 0
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-
-
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Replies: 0
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
