Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
View the thread, titled "Excellent pipe bending skills" which is posted in UK Plumbers Forums on UK Plumbers Forums.
Nothing wrong with that mate!😱😱
Restricted elbow guess one pipe system😀
Kinky!
Seen it before , surely its somebody messing about .
Or maybe not lol
Or maybe not lol
Strange , Old rad valve but new pipe, and no clips !
it's mircobore
Not as hard to do as it looks.
Just mark the pipe where you want the bend, get a hammer and cold chisel ( slightly blunt ) give it a firm hit.
The pipe will be creased enough for you to manually pull a bend.
Be careful not to over bend the pipe, you may crack the pipe if you have to unbend the pipe.
Should be good from a few days to a few years - depending on your capabilities.
Just be sure you get paid before leaving the job.
Just mark the pipe where you want the bend, get a hammer and cold chisel ( slightly blunt ) give it a firm hit.
The pipe will be creased enough for you to manually pull a bend.
Be careful not to over bend the pipe, you may crack the pipe if you have to unbend the pipe.
Should be good from a few days to a few years - depending on your capabilities.
Just be sure you get paid before leaving the job.
No need to throttle the lockshield down for balancing, fine idea
Guaranteed for as long as your van is on their driveway.
O
Old Account
Definitely neat but slightly disappointed of the installer ... being lazy and not using pipe clips. He could have also cleaned the pipe a little ...
Official Sponsors of Plumbers Talk
Reply to the thread, titled "Excellent pipe bending skills" which is posted in UK Plumbers Forums on Plumbers Forums.
Similar plumbing topics
We recommend City Plumbing Supplies, BES, and Plumbing Superstore for all plumbing supplies.
