Discuss Gas isolation valve with test point in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 34,365
- Solutions
- 2
does it matter if you have to use male irons? (eg can the valve be threaded)
- Messages
- 948
You can get one from BES
Gas Ball Valve - 22mm Compression Brass - 19950 | BES.co.uk
If you are not GSR you shouldn't be fitting it though, get a GSR person to fit.
Gas Ball Valve - 22mm Compression Brass - 19950 | BES.co.uk
If you are not GSR you shouldn't be fitting it though, get a GSR person to fit.
- Messages
- 12,703
Should you be giving that intel out unless you know the OP is GSR?
- Status
Reply to Gas isolation valve with test point in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Creating content since 2001. Untold Media.