gas safe inspection event

[kbs]

anyone been on a gas safe registration inspection event?

 

[Stu-B]

Yes I have, basically a power point presentation session with a small assessment at the end, all based around IGEM/G/11 unsafe situations procedures.
About 25 fairly local engineers for a 3 hour session with lots of questions and answers.

 

[Harvest Fields]

I had an actual inspection the other day. All went well so all good.

 

[bacon_sandwich]

I could not make the event as was away, so Gas safe re-organised an actual personal inspection with my usual contact.
Although i know it must have cost a bit more, i much much prefer it as the guy actually sees my installs and gives excellent feedback and help where the installs are a little unusual. (Non dom work).

 

[kbs]

Yes I have, basically a power point presentation session with a small assessment at the end, all based around IGEM/G/11 unsafe situations procedures.
About 25 fairly local engineers for a 3 hour session with lots of questions and answers.

thanks for the reply.. how many questions in the assesment? guessing its just basic stuff that no one would fail

 

[townfanjon]

thanks for the reply.. how many questions in the assesment? guessing its just basic stuff that no one would fail

Apparently if you get one of these invites you are a good lad , dont worry , very easy .

 

[EvilDrPorkChop]

Have to agree, I think in person inspections are better and should be carried out. There will be a disaster with this new system and HSE will come crashing down on them. Its a cost cutting exercise which will have bad consequences.

 

[Ricky]

i have total waste of time, powerpoint was out of focus, stupidly easy questions, tick box exercise